info@graphlertech.com+91 962-951-4005Coimbatore, Tamil Nadu, India
Upload 3D files Order tracking
Request a Quote
Industries · Data Centres

Precision Enclosures, Rack Hardware & Thermal Components for Data Centre Infrastructure

Graphler manufactures server rack structures, sheet metal chassis, busbars, liquid-cooling cold plates and coolant manifolds for hyperscale, colocation and edge data centres, built to your drawings with ISO 9001 aligned quality control.

Accepted CAD formatsSTEPIGESSTLZIP

Rack-Standard AccuracyLiquid Cooling ComponentsHigh-Current Power Hardware
  • Rack-Standard AccuracySheet metal and machined rack hardware built to 19-inch EIA-310 and wider open rack drawings, with hole-pattern and flatness checks on every batch.
  • Liquid Cooling ComponentsCNC-machined copper and aluminium cold plates, manifolds and heat sinks with pressure-tested fluid paths.
  • High-Current Power HardwareCopper and aluminium busbars, lugs and power shelf parts with plated contact surfaces.
  • Prototype to RolloutPilot quantities through repeat production runs for multi-hall and multi-site deployments.
  • Traceable QualityMaterial certificates, dimensional reports and leak-test records supplied with each shipment.

Operating envelope

Rising Density, Rising Heat, Tighter Deployment Schedules

Data centre hardware has to keep pace with rack densities that climb with every hardware generation.

Power per rack keeps rising, liquid cooling is moving from pilot to standard, and new halls are commissioned on tight schedules where every part must fit first time across hundreds of identical racks. A cold plate that weeps, a busbar that runs hot or a rail that is a millimetre out of position stops an installation. Graphler combines precision CNC machining, sheet metal fabrication and controlled finishing so rack, power and cooling hardware arrives consistent, documented and ready to install.

Core Manufacturing Solutions for Data Centre Subsystems

01

Rack Structures, Chassis & Enclosures

  • Sheet Metal Chassis & Server Trays

    Laser cutting, CNC bending and self-clinching hardware insertion for server, storage and network chassis in galvanised steel and aluminium.

  • Rack Frames, Rails & Cable Management

    Welded and bolted rack frames, adjustable rails, cable trays and brackets with controlled hole positions for tool-free assembly.

  • Edge & Outdoor Enclosures

    Gasketed, powder-coated enclosures with vented panels for edge computing and telecom sites.

02

Liquid Cooling & Thermal Management

  • Cold Plates & Heat Sinks

    CNC-machined copper and aluminium cold plates with milled internal channels, flatness-controlled contact faces and machined fin heat sinks.

  • Coolant Manifolds & CDU Components

    Machined aluminium and stainless steel manifolds, port blocks and brackets for coolant distribution units.

  • Leak & Pressure Testing

    Pressure decay and leak testing of every fluid path before dispatch, with results recorded per part.

03

Power Distribution & Electrical Hardware

  • Busbars & Power Shelf Hardware

    Punched, bent and machined copper and aluminium busbars with tin, nickel or silver plating at contact areas.

  • Insulated Busbar Assemblies

    Busbar assemblies with insulation sleeving or powder coating and clearances held to drawing.

  • Grounding & Bonding Components

    Earthing bars, lugs and bonding straps for rack and room grounding systems.

Quality Control, Testing & Documentation

Inspection, testing and documentation run inside the same quality system as production.

  • Dimensional Inspection

    CMM and gauge checks on hole patterns, rail positions and the flatness of cold plate contact faces.

  • Leak & Pressure Testing

    Pressure decay testing on every cold plate and manifold fluid path, recorded against the part number.

  • Plating & Coating Verification

    Thickness and adhesion checks on busbar plating, powder coat and passivated surfaces.

  • Material Traceability

    Mill test certificates and batch traceability from raw material to dispatched part.

Data Centre Grade Metals & Engineering Materials

We source materials with mill test certificates and match each finish to the environment the part will see.

01Server Chassis & Rack StructuresGalvanised Steel (GI), Cold-Rolled Steel (CRCA), Aluminium 5052-H32
Galvanised Steel (GI)Cold-Rolled Steel (CRCA)Aluminium 5052-H32

Stiff, flat panels that bend cleanly and hold inserted hardware.

02Cold Plates & Heat SinksCopper C11000, Aluminium 6061-T6, Aluminium 6063
Copper C11000Aluminium 6061-T6Aluminium 6063

High thermal conductivity for direct-to-chip heat transfer.

03Coolant Manifolds & Port BlocksAluminium 6061-T6, Stainless Steel 304, Stainless Steel 316L
Aluminium 6061-T6Stainless Steel 304Stainless Steel 316L

Corrosion resistance in water-glycol and dielectric coolant loops.

04Busbars & Power HardwareCopper C11000, Aluminium 6101, Brass C36000
Copper C11000Aluminium 6101Brass C36000

Low electrical resistance with platable contact surfaces.

05Edge & Outdoor EnclosuresAluminium 5052-H32, Stainless Steel 304, Galvanised Steel
Aluminium 5052-H32Stainless Steel 304Galvanised Steel

Weather resistance under powder coating or passivation.

Systematic 6-Step Data Centre Hardware Workflow

  1. 1

    CAD upload & review

    Upload 3D CAD models, drawings and the bill of materials for rack, power or cooling hardware.

  2. 2

    DFM & engineering review

    DFM review of bend radii, hole patterns, channel geometry and plating areas, with feedback before quoting.

  3. 3

    Controlled manufacturing

    Controlled CNC machining, laser cutting, bending and welding on dedicated fixtures for repeat accuracy.

  4. 4

    Post-processing

    Deburring, plating, powder coating or passivation to your specification.

  5. 5

    Quality inspection

    Dimensional inspection, leak testing and documentation for each production lot.

  6. 6

    Packaging & logistics

    Protective packaging, labelling by rack or site, and dispatch timed to staged rollouts.

Technical questions: Data Centres

Straight answers from the engineers who run the work.

Ask a technical question
Can Graphler machine liquid-cooling cold plates?

Yes. We CNC machine copper and aluminium cold plates with internal channels, hold the flatness of the contact face to your drawing, and pressure test each fluid path before it ships.

Do you build to standard rack dimensions?

We build rack frames, rails, trays and panels to your drawings, including 19-inch EIA-310 layouts and wider open rack formats, and check hole positions and flatness on every batch.

Can you support multi-site rollouts?

Yes. We keep approved drawings and fixtures for repeat orders, label and pack hardware by rack or site, and schedule deliveries in batches to match your installation plan.

Start a Data Centre project

Upload your 3D CAD model and drawing. An engineer reviews feasibility, tolerances and material certification before we quote.