Quality Control & Comprehensive Dimensional Inspection
At Graphler Manufacturing Solutions, quality is not a retrospective sorting exercise. It is a closed-loop engineering discipline. Operating within our ISO 9001 compliant quality management system, Gateway 3 ensures that every machined part, casting, weldment, and moulded component conforms unconditionally to customer specifications. From raw material Positive Material Identification (PMI) to sub-micron CMM coordinate measurement, our metrology infrastructure provides total traceability and zero-defect certainty.
- Gateway leadDirector of Quality Assurance & Chief Metrologist
- Standard turnaround100% In-Process & Pre-Shipment Inspection Gate
- Required inputsFirst-Piece Off-Machine, Ballooned GD&T Engineering Drawings, Master QIP
Gateway charter
Gateway Operational Charter & Business Value Architecture
Precision components serving aerospace, medical, automotive, and energy sectors must function flawlessly in mission-critical environments.
Graphler's metrology protocols eliminate measurement uncertainty. Our temperature-regulated metrology laboratory (maintained at 20°C ± 0.5°C) neutralizes ambient thermal expansion, ensuring that drawing tolerances as tight as ±0.0002 inches (±0.005 mm) are verified with absolute repeatability. Every batch is governed by structured Statistical Process Control (SPC), guaranteeing that process capability indices (Cpk >= 1.67) meet world-class manufacturing standards.
Operational SLA & Performance Benchmark Dashboard
Live benchmarks for the metrology lab and inspection floor.
20°C ± 0.5°C Environment
Metrology Lab Thermal Drift
Continuous digital climate logging with automatic alert interlocks
MPE_E <= 1.5 + L/350 µm
CMM Coordinate Accuracy
Renishaw continuous scanning probe calibrated to ISO 10360-2
0.00% Escapes to Shipping
In-Process Defect Escapes
Multi-station SPC audits with automated digital caliper logging
100% AS9102 / ISO Format
First Article Documentation
Complete ballooned prints with recorded actual variable data points
Standard Operating Procedure (SOP) Stage-by-Stage Breakdown
Stage A
Incoming Raw Material Verification & Positive Material Identification
Quality starts with verified stock. Every incoming billet, plate, casting ingot, or polymer resin lot undergoes verification. Our QA inspectors verify mill test reports (MTRs) against purchasing specifications. High-performance alloys (Titanium Ti-6Al-4V, Inconel 718, Stainless 316L, 17-4PH) undergo non-destructive Positive Material Identification (PMI) via handheld X-Ray Fluorescence (XRF) spectrometry to confirm exact elemental chemistry before issuance to the machine shop.
Stage B
First Article Off-Machine Inspection & Spindle Offset Calibration
The first part produced from any CNC setup is removed and transferred to the metrology lab for First Article Inspection (FAI). The part is allowed to thermally stabilize, then measured against a fully ballooned GD&T drawing using our automated CNC Coordinate Measuring Machine (CMM). True position, concentricity, perpendicularity, and profile tolerances are verified. Any observed micro-deviation is fed back into machine tool offsets before volume manufacturing authorization is granted.
Stage C
Statistical Process Control (SPC) & In-Process Multi-Station Audits
During production runs, machine operators and roaming quality auditors conduct scheduled in-process inspections at fixed intervals. Calibrated digital micrometers, bore gages, and optical height gages record critical dimensions directly into our SPC database. Control charts track trend drift to anticipate tool wear, enabling proactive insert replacement before dimensions breach control boundaries.
Stage D
Final Metrology Acceptance, NDT Testing & FAIR Compilation
Following primary machining and secondary operations (heat treatment, plating, anodizing, painting), parts undergo final acceptance inspection. Surface roughness profilometers measure Ra and Rz micro-textures. Where required, Non-Destructive Testing (NDT), including liquid penetrant (LPT), magnetic particle (MPI), and ultrasonic testing (UT), confirms subsurface integrity. The formal First Article Inspection Report (FAIR) is compiled and digitally signed.
Gateway Failure Mode Prevention Matrix (FMEA Approach)
Each hazard is mapped to a prevention check and the record that proves it.
| Metrology Risk / Hazard | Root Cause | Graphler Prevention Check | Verification Deliverable |
|---|---|---|---|
| Thermal Measurement Error | Measuring hot parts immediately after heavy milling cuts | Enforce mandatory 2-hour soak in 20°C climate-controlled metrology lab | Thermal Stabilization Sheet |
| Surface Roughness Failure | Worn cutter wiper facet causing surface finish above Ra 0.8 µm | Diamond stylus profilometer verification at every tool change cycle | Surface Roughness Profile Graph |
| Subsurface Casting Voids | Micro-shrinkage porosity in high-pressure fluid castings | Perform radiographic (X-ray) or ultrasonic flaw testing per ASTM E1444 | Certified NDT Test Report |
| Thread Pitch Non-Conformance | Tap wear causing pitch diameter shrinkage under torque load | Calibrated thread plug/ring gages cross-checked via optical comparator | Thread Inspection Log |
Advanced Metrology Stack & Testing Infrastructure
Multi-Axis CNC CMM
Zeiss / Mitutoyo Bridge CMM
Automated 3D coordinate scanning of complex GD&T features
ISO 10360-2 CalibratedSurface Profilometry
Mitutoyo Surftest Diamond Stylus
Quantitative Ra, Rz, Rq surface micro-roughness profiling
ISO 4287 / ASME B46.1Optical Vision System
High-Resolution CNC Vision Comparator
Non-contact 2D edge detection, micro-apertures, corner radii
NIST Traceable CalibrationMaterial Analysis (PMI)
Handheld XRF Alloy Analyzer
Instant non-destructive chemical composition verification
ASTM E1476 / DIN 51001
Client Audit Dossier & Gateway Deliverables
Every production shipment from Graphler is accompanied by a comprehensive quality dossier
First Article Inspection Report (FAIR / AS9102)
Ballooned drawing cross-referenced to 100% measured variable data points.
Certificate of Conformance (CoC)
Formal legal attestation confirming adherence to PO requirements and drawing revisions.
Raw Material Test Reports (MTRs)
Certified mill documentation detailing chemical heat analysis and mechanical tensile test results.
Secondary Process Certifications
Heat treatment hardness graphs, plating thickness reports, and NDT examination logs.
Progression gate
Progression Gate Criteria: Handoff to Logistics & Packaging
Parts cannot be transferred to packaging and logistics until the Quality Department issues formal gate release
Next gatewayGlobal Logistics & Shipping- 1
100% CMM dimensional inspection passes all specified GD&T limits with zero open deviations
- 2
Ultrasonic cleaning, chip blow-off, and chemical passivation / surface treatments are verified under 10x visual inspection
- 3
Quality Assurance stamp and digital sign-off are recorded on the MES master job traveler
- 4
Client-specific inspection dossiers (FAIR, CoC, MTRs) are packaged and uploaded to the client portal
Questions about quality control & dimensional inspection
What inspection standards does Graphler follow for precision components?
Our quality management system is aligned with ISO 9001 and aerospace AS9100/AS9102 standards. We provide full First Article Inspection Reports (FAIR) with ballooned prints, CMM point clouds, and raw material mill certificates.
What is the tightest tolerance Graphler can verify in its metrology lab?
Our climate-controlled metrology laboratory is equipped with high-accuracy CNC Coordinate Measuring Machines capable of verifying dimensional callouts down to ±0.0002 inches (±0.005 mm) and sub-micron form characteristics.
Does Graphler provide material traceability reports with orders?
Yes. Every production batch is 100% traceable to its original raw material heat lot. We provide authentic EN 10204 Type 3.1 Mill Test Reports (MTRs) and handheld XRF Positive Material Identification (PMI) logs upon request.
How does Graphler handle non-conforming parts detected during inspection?
Any component deviating from specified drawing tolerances is immediately quarantined in a secure lock-box area under a formal Non-Conformance Report (NCR). Our quality engineering team initiates a root-cause analysis (8D / 5-Why) to eliminate the variance at the machine tool.
Initiate this gateway with your drawings
Submit 3D CAD files and 2D drawings for feasibility review, DFM consultation and production routing.