info@graphlertech.com+91 962-951-4005Coimbatore, Tamil Nadu, India
Upload 3D files Order tracking
Request a Quote
3D / CAD viewer

Interactive Cloud 3D CAD Model Viewer & Automated DFM Telemetry Engine

Graphler's WebGL-powered 3D CAD Viewer transforms how design leads and procurement managers interact with digital engineering models. Built on an enterprise-grade cloud geometry kernel, our browser-native viewer enables immediate multi-angle rotation, dynamic plane slicing, wall-thickness heatmapping, and automated Design for Manufacturability (DFM) verification, all without requiring CAD licenses or software installation.

Sample part: turned flange hubDrag to rotate · scroll to zoom · shift-drag to pan

Core Viewer Engine Architecture & Automated Inspection Capabilities

The live preview above covers orbit, section planes, draft analysis and mass properties. Wall-thickness mapping runs in our engineering review.

  • Multi-Axis Orbit & Zoom

    EngineClient-side WebGL / Three.js GPU rendering

    EvaluatesContinuous 6-DOF geometric inspection

    Zero-latency 360-degree rotation across large assemblies

  • Dynamic Cross-Section Slicing

    EngineInteractive Cartesian clip planes (X, Y, Z)

    EvaluatesInternal bore alignment & hollow voids

    Instant inspection of concealed internal cavities and cross-holes

  • Automated Wall-Thickness Heatmap

    EngineRay-cast normal boundary distance computation

    EvaluatesCritical minimum wall thresholds (e.g., < 0.8 mm)

    Early identification of sink-mark, blowout, and tool-chatter zones

  • Undercut & Draft Angle Analysis

    EngineB-Rep surface normal vs. pull vector evaluation

    EvaluatesDraft angles (0.5 to 3.0°) and negative drafts

    Identification of mandatory side-actions and EDM electrode requirements

  • Instant Bounding Box & Mass Calculation

    EngineExact B-Rep boundary volume interrogation

    EvaluatesEnvelope dimensions, surface area, and mass

    Instant material stock sizing and roughing cycle estimation

Integrated Automated DFM Telemetry Modules

Minimum Wall Thickness Heatmap Evaluation

Why it matters
In thin-wall CNC milling and injection moulding, insufficient wall thickness leads to high-frequency chatter, surface warping, or incomplete cavity filling. Conversely, excessively heavy cross-sections cause internal sink marks in castings and molding.
How the viewer computes it
The viewer casts bidirectional surface-normal rays across the imported solid model, calculating distance to opposing interior faces. Surfaces are rendered with a dynamic chromatic gradient (Red = critical thin < 0.8 mm, Green = nominal 1.5-4.0 mm, Blue = excessive mass > 8.0 mm).
What you get
Provides immediate visual alerts pinpointing exactly where wall stiffeners, fillets, or core-outs are required prior to tool commitment.

Draft Angle and tool Access Collision Detection

Why it matters
Parts produced via casting, injection moulding, or deep-cavity CNC milling require adequate draft angles (typically 1.0° to 2.0° minimum) for clean part ejection and tool shank clearance without gouging.
How the viewer computes it
Users define a designated primary pull direction or machine spindle Z-vector. The viewer algorithm computes the angle between surface normals and the parting vector, shading zero-draft vertical walls in yellow and negative-draft undercuts in bright red.
What you get
Highlights required side-action mold cams, lifters, or multi-axis 5-axis continuous milling passes before formal quotation.

Interior Pocket Depth-to-Diameter Ratio

Why it matters
Standard end mills deflect exponentially when pocket depth exceeds 4x tool diameter. Deep narrow slots mandate high-cost long-reach cutters, conservative feed rates, or secondary sinker EDM.
How the viewer computes it
The geometry kernel measures internal cavity floor depth relative to perimeter opening diameter, flagging aspect ratios greater than 4:1 with automated cutter reach warnings.
What you get
Recommends corner radius enlargement or internal floor shallowing to preserve tooling life and lower machining cost per part.

Supported File Formats & Enterprise Security Sandbox

Client intellectual property is protected by rigorous cryptographic controls. 3D CAD files uploaded to our viewer are rendered client-side or processed in an isolated ephemeral memory container protected by AES-256 bit encryption. Models are never stored permanently without user consent, never cached on public servers, and never shared with third parties.

  • Standard Neutral 3D Formats

    .stp, .step.x_t, .x_b.igs

    STEP (.stp, .step), Parasolid (.x_t, .x_b), IGES (.igs)

    TranslationExact B-Rep Boundary Representation kernel

    SecurityTLS 1.3 / AES-256 encrypted memory buffer

  • Mesh & Prototyping Formats

    .stl.obj.3mf.ply

    STL (.stl), OBJ (.obj), 3MF (.3mf), PLY (.ply)

    TranslationPolygon mesh decimation & tessellation kernel

    SecurityEphemeral rendering with automatic memory wipe

  • Native CAD Model Formats

    .sldprt.prt

    SolidWorks (.sldprt), Siemens NX (.prt), Autodesk Inventor

    TranslationDirect API parasolid parsing

    SecurityAir-gapped dedicated CAD conversion pipeline

  • Drawing & Documentation Packages

    .ZIP, .7Z

    Compressed archives (.ZIP, .7Z) containing 2D PDF + 3D

    TranslationAutomated file tree extraction & linking

    SecurityRestricted access with non-disclosure protection

CAD viewer & online DFM questions

  • Do I need to install any software or browser plugins to use the Graphler 3D Viewer?

    No. The Graphler 3D CAD Viewer runs completely in any modern web browser (Google Chrome, Mozilla Firefox, Safari, Microsoft Edge) using WebGL GPU hardware acceleration with zero plugins or downloads required.

  • Is my 3D CAD geometry stored or used to train public machine learning models?

    Strictly no. Graphler maintains absolute IP confidentiality. Uploaded geometries are processed within an encrypted, ephemeral sandbox solely for geometry analysis and quoting, and are never shared or used for model training.

  • Can I request an express manufacturing quote directly from the 3D Viewer?

    Yes. With a single click inside the viewer interface, your analyzed CAD model, verified material selection, and desired volume tiers can be forwarded to our estimating team for a formal quote within 4 to 8 hours.

Talk to an engineerShare your drawing and requirements. We review every request before quoting.

Ready for a formal DFM review?

Send the model and drawing. An application engineer returns feasibility notes and an itemised quote.