info@graphlertech.com+91 962-951-4005Coimbatore, Tamil Nadu, India
Upload 3D files Order tracking
Request a Quote
1Gateway 1 of 4

Quoting & Two-Stage Technical Feasibility Review

In modern contract manufacturing, an inaccurate quote is an engineering failure waiting to happen. At Graphler Manufacturing Solutions, our quoting process is not an administrative sales exercise. It is our first operational quality gate. By pairing automated geometric interrogations with senior application engineering reviews, we eliminate manufacturing bottlenecks, screen for geometric risks, and deliver optimized pricing backed by a two-stage technical feasibility review.

  • Gateway leadSenior Applications Engineer & Cost Modeling Lead
  • Standard turnaroundUnder 8 Hours (Same-Day Technical Delivery)
  • Required inputs3D CAD (STEP, IGES, STL), 2D Prints with GD&T (PDF), Material Spec, Batch Volume
  1. 01Quoting & Feasibility Review
  2. 02Engineering-Led Production Planning
  3. 03Quality Control & Dimensional Inspection
  4. 04Global Logistics & Shipping

Gateway Operational Charter & Business Value Architecture

Our quoting gate operates under the manufacturing Rule of 10s: a geometry or tolerancing defect identified and corrected during quoting costs 1x to resolve. If allowed to escape into production planning, it costs 10x; into CNC setup, 100x; into final inspection, 1,000x; and at final assembly in the field, over 10,000x. Graphler eliminates blind assumptions by interrogating 3D solid geometry, tool clearance envelopes, and material procurement timelines before committing to a binding quote.

Relative cost to correct one defect, by the stage where it is found

  1. 1xQuoting
  2. 10xProduction planning
  3. 100xCNC setup
  4. 1,000xFinal inspection
  5. 10,000x+Field assembly

Operational SLA & Performance Benchmark Dashboard

Every benchmark below is measured, logged and reported on the project record.

  • Quoting Turnaround Speed

    <= 8 Hours (Same-Day)

    Verified by Digital intake logging & automated timestamp tracking

    Accelerated procurement cycles and rapid project kickoffs

  • CAD Geometric Integrity

    100% Solid Verification

    Verified by Mesh stitch check, non-manifold edge detection, volume audit

    Zero unexpected machining stoppages due to corrupted files

  • Quote-to-Shop Floor Variance

    < 1.5% Cost Deviation

    Verified by Algorithmic speed/feed calculation against current raw stock indices

    Guaranteed cost predictability across batch manufacturing

  • Early DFM Risk Identification

    100% Pre-Machining Gate

    Verified by Automated aspect-ratio scan, deep pocket check, draft evaluation

    Immediate identification of high-cost features before cutting metal

Standard Operating Procedure (SOP) Stage-by-Stage Breakdown

Stage A

Digital Intake, NDA Clearance & Model Sanitization

Upon customer submission, files are ingested into our encrypted vault under active Non-Disclosure Agreements (NDA). Native CAD files (SolidWorks, Inventor, Creo, Catia) or neutral formats (STEP AP242, IGES 5.3, Parasolid) are checked for geometric validity, ensuring surfaces are stitched, sheet bodies are converted to watertight solids, and unit scales (metric vs imperial) match drawing specifications.

Stage B

Automated Feature Interrogation & Geometry Screening

Our digital interrogation scripts evaluate the 3D model against standard manufacturing physics. For CNC milling, it flags internal corner radii requiring cutters smaller than 1.0 mm, pocket depths exceeding 4x tool diameter, and wall sections below 0.8 mm. For sheet metal, it verifies bend relief cutouts and minimum hole-to-bend distances. For casting and injection moulding, it calculates wall uniformity and draft angles.

Stage C

Senior Application Engineer Review & Machine Routing

A senior manufacturing engineer conducts a physical feasibility review, cross-referencing the 3D solid model against the 2D engineering print. The engineer assigns the optimal production route: 3-Axis VMC vs 4-Axis HMC vs 5-Axis vs CNC Turning vs EDM vs Precision Casting. Critical tolerances down to ±0.0002 inches are highlighted for dedicated inspection planning.

Stage D

Transparent Cost Modeling & Delivery Scheduling

Using real-time raw material market indices and machine-hour scheduling rates, we generate an itemized quote. Costs are separated into raw stock, machine runtime, specialized tooling/fixtures, secondary surface treatments (anodizing, plating, heat treatment), and packaging. Volume discount tiers are established for prototype (1-10), pilot (50-200), and mass production (1,000+).

Gateway Failure Mode Prevention Matrix (FMEA Approach)

Turn a card to see how each design risk is caught at this gate.

  • Risk 01

    Deep Pocket Chatter

    Root CausePocket depth > 6x tool diameter

    Show countermeasure
    Countermeasure

    Recommend corner radii relief or secondary sinker EDM operation

    Verification ArtifactStage-1 DFM Feasibility Callout

  • Risk 02

    Drawing / Model Discrepancy

    Root Cause2D PDF dimensions conflict with 3D STEP solid

    Show countermeasure
    Countermeasure

    Physical drawing overlay check; query client prior to quoting

    Verification ArtifactTechnical Clarification Request (TCR)

  • Risk 03

    Over-Tight Tolerances

    Root CauseGeneral ±0.0002" applied to non-mating cosmetic faces

    Show countermeasure
    Countermeasure

    Suggest relaxing non-critical faces while locking functional bores

    Verification ArtifactCost Reduction Recommendation

  • Risk 04

    Thin-Wall Flexure

    Root CauseMachined wall < 0.6 mm in structural aluminium

    Show countermeasure
    Countermeasure

    Recommend rib stiffening or progressive machining sequencing

    Verification ArtifactStructural Rigidity Advisory

Advanced Engineering Stack & Metrology Infrastructure

  • Solid Interrogation

    Siemens NX & SolidWorks CAD Engine

    Watertight volume extraction, draft analysis, interference check

    STEP AP242 / Parasolid XT
  • Algorithmic Costing

    Graphler Machine-Hour Cost Matrix

    Speed/feed kinematics, tool wear rate, cycle time estimation

    ISO 9001 Process Control
  • Mesh & Surface Healing

    Materialise Magics & Rhino 3D

    Surface mesh repair, STL water-tightness, face re-orientation

    AMF / STL High-Resolution
  • Encrypted Data Vault

    AES-256 Cloud Infrastructure

    Confidential customer CAD ingestion, drawing storage, NDA tracking

    SOC 2 & ISO 27001 Aligned

Client Audit Dossier & Gateway Deliverables

Upon completion of Gateway 1, the client receives a structured procurement package

  • Itemized Technical Quote

    Transparent breakdown of material, machining, secondary finishing, and batch tiers.

  • Stage-1 DFM Feasibility Snapshot

    Actionable engineering feedback highlighting potential manufacturing cost drivers.

  • Production Scheduling Commitment

    Firm milestone schedule detailing raw stock arrival, machining windows, and final delivery dates.

Progression gate

Progression Gate Criteria: Handoff to Production Planning

A project cannot advance to Gateway 2 (Engineering-Led Production Planning) until four mandatory conditions are met

Next gatewayEngineering-Led Production Planning
  1. 1

    Signed Technical Agreement & Formal Purchase Order matched to exact drawing revision levels

  2. 2

    Resolution of all Technical Clarification Requests (TCRs) regarding GD&T tolerances or material grades

  3. 3

    Verification of raw material alloy stock availability with certified mill test reports (MTRs)

  4. 4

    Assignment of a dedicated Lead Project Engineer as single point of technical contact

Questions about quoting & feasibility review

How quickly does Graphler return a formal manufacturing quote?

For standard CNC machining, sheet metal, and 3D printing projects, Graphler delivers a comprehensive technical quote and feasibility assessment within 8 hours (same day). Complex multi-part assemblies, custom casting patterns, and progressive injection mould tooling are delivered within 24 to 48 hours.

What CAD file formats are preferred for quoting?

We recommend 3D CAD files in STEP (.stp, .step), Parasolid (.x_t), or IGES (.igs) format accompanied by a 2D engineering drawing in PDF format specifying critical GD&T tolerances, surface finishes, and material grades.

Does Graphler charge for the Stage-1 DFM feasibility review?

No. Our two-stage technical feasibility review and initial DFM evaluation are included free of charge as part of our commitment to engineering-led value creation and defect prevention.

How does Graphler ensure customer intellectual property protection during quoting?

Every CAD file and drawing submitted to Graphler is ingested into an encrypted, access-controlled vault protected by binding mutual Non-Disclosure Agreements (NDAs). Your design data is never shared with unauthorized third parties.

Talk to an engineerShare your drawing and requirements. We review every request before quoting.

Initiate this gateway with your drawings

Submit 3D CAD files and 2D drawings for feasibility review, DFM consultation and production routing.