info@graphlertech.com+91 962-951-4005Coimbatore, Tamil Nadu, India
Upload 3D files Order tracking
Request a Quote
Industries · Renewable Energy

Precision Manufacturing & Structural Fabrication for Solar & Wind Energy Infrastructure

Graphler manufactures heavy wind turbine rotor hubs, yaw/pitch gearbox housings, main shafts, solar single-axis tracker torque tubes, slewing drive brackets, and high-efficiency power inverter enclosures with certified ISO 9001 precision.

Accepted CAD formatsSTLSTEPIGESZIP

Wind Turbine Heavy MachiningHigh-Volume Solar Tracker FormingCorrosion Protection (C4/C5 & HDG)
  • Wind Turbine Heavy MachiningLarge-capacity VTL and horizontal boring for cast hubs, main bearing housings, and planet carriers.
  • High-Volume Solar Tracker FormingAutomated roll forming, laser cutting, and robotic welding for torque tubes and slewing brackets.
  • Corrosion Protection (C4/C5 & HDG)Hot-dip galvanizing, electro-galvanizing, and heavy-duty powder coating for 25+ year outdoor service life.
  • FEA Structural Fatigue AnalysisFinite Element Analysis (FEA) to validate wind cyclic gust loads and solar torsional wind flutter.
  • Traceable Quality ControlCertified ISO 9001 quality systems with batch-level material certifications.

Decades of Continuous Outdoor Weathering & Dynamic Wind Loads

Renewable energy infrastructure must perform reliably for 25 to 30 years in brutal outdoor environments: utility-scale solar farms endure intense UV exposure, desert sand abrasion, and high gust uplift loads, while multi-megawatt wind turbines operate under massive rotational torque, high-cycle fatigue, and salt-laden marine air. Graphler bridges engineering design and scalable manufacturing. We combine large-scale CNC machining, high-capacity structural steel fabrication, and FEA simulation to manufacture durable, cost-effective components that drive down Levelized Cost of Energy (LCOE).

Core Manufacturing Solutions for Solar & Wind Subsystems

01

Wind Turbine Powertrain & Nacelle Components

  • Large Planetary Gearbox Housings

    Machining ductile iron planet carriers, ring gear blanks, and gearbox casings on large HMC and VTL setups.

  • Main Bearing Housings & Shafts

    Precision turning and boring to ±0.0002 inches on forged alloy steel shafts to support massive rotor blade bending loads.

  • Yaw & Pitch Drive Mounting Flanges

    Heavy CNC milling and drilling of precision mounting holes to ensure gear mesh alignment with slewing rings.

02

Solar Single-Axis Trackers & Mounting Structures

  • Torque Tube Cutting & Punching

    High-speed laser cutting and CNC punching of round, square, and octagonal structural steel torque tubes.

  • Slewing Drive & Bearing Brackets

    Forming high-yield steel brackets and motor mounts engineered to resist dynamic torsional wind flutter.

  • Hot-Dip Galvanized Coating

    Heavy zinc coating compliant with ISO 1461 to guarantee 25+ years of corrosion-free performance in soil and desert environments.

03

Power Inverter & Grid Transformer Enclosures

  • Precision Sheet Metal Cabinets

    Fiber laser cutting and CNC press brake bending of NEMA 4X / IP66 outdoor electrical inverter enclosures.

  • High-Current Copper Busbars

    CNC milling, punching, and silver/tin plating of high-conductivity busbars for utility-scale solar string inverters.

  • Liquid Cooling Cold Plates

    Precision micro-channel aluminium cold plates for IGBT inverter module heat dissipation.

Integrated Simulation (FEA/CFD) & ISO 9001 Quality Control

  1. 01

    FEA Wind Load & Fatigue Simulation

    Evaluating high-cycle fatigue life and torsional deflection under 100-year extreme wind events.

  2. 02

    Ultrasonic & Magnetic Particle NDT

    Testing thick-section castings and heavy weld seams to ensure zero subsurface inclusions.

  3. 03

    CMM & Laser Tracker Inspection

    Large-envelope coordinate verification of bearing centers and flange parallelism.

  4. 04

    Corrosion & Salt Spray Testing

    ASTM B117 salt fog testing to confirm coating adhesion and rust prevention.

High-Yield Structural Steels, Castings & Conductive Bus Alloys

We manufacture components from high-toughness steels and electrical-grade non-ferrous metals:

Wind Hubs & Planetary Carriers

Ductile Iron (EN-GJS-400-18U-LT, 500-7)

Sub-zero impact toughness (-20°C) and high fatigue resistance

Wind Main Shafts & Pinions

Forged Alloy Steel (42CrMo4, 34CrNiMo6)

High core toughness and through-hardened wear resistance under reversing loads

Solar Tracker Torque Tubes

High-Strength Low-Alloy Steel (S355, S420)

High torsional rigidity to prevent wind-induced aeroelastic galloping

Inverter Enclosures & Chassis

Galvanized SteelAluminium 5052-H32

Corrosion protection and electromagnetic shielding for power electronics

Inverter Power Busbars

ETP Copper (C11000)Aluminium 6101

High electrical conductivity to minimize energy transmission losses

Systematic 6-Step Engineering & Production Workflow

Six controlled stages from first upload to delivered parts.

  1. 01

    CAD upload & review

    Submit 3D models and technical specifications for rapid quoting backed by feasibility analysis.

  2. 02

    DFM & engineering review

    Engineering DFM review to optimize structural steel layouts, nesting, and machining allowances.

  3. 03

    Controlled manufacturing

    Controlled production via heavy VTL/HMC machining, fiber laser cutting, and automated welding.

  4. 04

    Post-processing

    Surface finishing via hot-dip galvanizing, electrostatic powder coating, or zinc plating.

  5. 05

    Quality inspection

    Comprehensive dimensional validation, NDT weld checks, and coating thickness verification.

  6. 06

    Packaging & logistics

    Export packaging and logistical management for global delivery to utility-scale project sites.

Technical questions: Renewable Energy

Straight answers from the engineers who run the work.

Ask a technical question
What size wind turbine components can Graphler machine?

We machine large-scale cast iron hubs, main bearing housings, and gearbox planet carriers up to several meters in diameter using heavy Vertical Turret Lathes (VTL) and Horizontal Machining Centers (HMC).

How does Graphler ensure 25-year corrosion protection for solar tracker components?

We provide hot-dip galvanizing compliant with ISO 1461 / ASTM A123, ensuring heavy zinc layer thicknesses (>85 microns) that defend steel structures against soil chemicals, atmospheric moisture, and desert abrasion.

Can Graphler manufacture liquid cooling cold plates for solar and wind power inverters?

Yes. We CNC machine high-efficiency aluminium and copper cold plates with vacuum or O-ring sealed internal channels to dissipate heat from high-power IGBT inverter modules.

Start a Renewable Energy project

Upload your 3D CAD model and drawing. An engineer reviews feasibility, tolerances and material certification before we quote.