High-Precision Medical Device Manufacturing & Life Sciences Engineering
Graphler manufactures surgical instruments, orthopaedic implant prototypes, diagnostic equipment housings, micro-fluidic manifolds, and laboratory automation assemblies with micron-level tolerances and medical-grade biocompatible materials.
Accepted CAD formatsSTLSTEPIGESZIP
- Biocompatible Medical MaterialsCertified processing of Titanium (Ti-6Al-4V ELI), Medical Stainless (316L, 17-4PH), and PEEK.
- Micro-Precision CNC MachiningMicro-milling, Swiss turning, and wire EDM for surgical components with tolerances down to ±0.0002 inches.
- Burr-Free Microscopic EdgesElectropolishing and microscopic deburring to eliminate microscopic burrs and sharp edges.
- Clean Chemical PassivationASTM A967 compliant nitric and citric acid passivation to guarantee maximum corrosion resistance.
- ISO 9001 Quality & TraceabilityFull batch material traceability, optical CMM validation, and cleanroom-ready packaging.
Biocompatibility, Micro-Dimensional Tolerances & Patient Safety
Medical and life science equipment manufacturing allows zero margin for error:
Graphler combines micron-level CNC machining, wire EDM, clean chemical passivation, and medical-grade polymers to deliver components that meet the strictest standards of safety, biocompatibility, and operational reliability
- 01
Surgical tools must withstand thousands of harsh autoclave sterilization cycles without corroding
- 02
Microfluidic manifolds require burr-free internal channels to prevent blood cell hemolysis
- 03
Diagnostic laboratory equipment demands vibration-free structural alignment
Verified before it ships
Integrated Simulation (FEA/CFD) & ISO 9001 Quality Control
ASTM A967 Chemical Passivation
Validating passive chromium-oxide surface layers using copper sulfate and water-immersion testing.
High-Magnification Optical Metrology
Inspection under 50x magnification to confirm zero burrs, sharp-edge radiuses, and surface cleanliness.
CMM & Micro-Coordinate Verification
Probing critical micro-tolerances down to ±0.0002 inches on temperature-controlled CMMs.
Full 100% Bio-Material Pedigree
Supplying biocompatibility material certificates and chemical mill test reports with every shipment.
Core Manufacturing Solutions for Medical & Life Sciences Subsystems
Precision Swiss CNC Turning
Manufacturing slender surgical trocars, drill guides, laparoscopic jaws, and endoscopic articulating joints.
Micro-Wire EDM Cutting
Machining razor-sharp cutting edges, microscopic serrations, and flexure mechanisms without heat-affected zones.
Microscopic Deburring & Passivation
Electropolishing and chemical passivation compliant with ASTM A967 to ensure bio-inertness and corrosion-free sterilization.
Diffusion-Bonded Acrylic Manifolds
Precision CNC micro-milling of optical acrylic (PMMA) and Ultem manifolds with mirror-polished internal fluid channels.
Chemical-Resistant PEEK Manifolds
Machining high-purity PEEK fluidic valves and pump heads for clinical chemistry and DNA sequencing analyzers.
Diagnostic Analyzer Chassis
Precision sheet metal fabrication of vibration-damped structural chassis for benchtop clinical diagnostic instruments.
5-Axis Implant Machining
Milling complex anatomical surfaces for titanium bone plates, spinal cages, and femoral trial stems.
External Fixation Hardware
Machining lightweight, radiolucent carbon fiber clamps and aluminium fixator rings for trauma stabilization.
Laser Marking & Traceability
High-contrast UDI-compliant fiber laser marking for permanent part serial numbers.
Biocompatible Metals, Medical Stainless & High-Performance Polymers
We process certified medical-grade alloys and USP Class VI biocompatible engineering polymers:
01Orthopaedic Implants & Bone ScrewsTitanium Ti-6Al-4V ELI (Grade 23)
High strength, low elastic modulus close to bone, and proven osseointegration
02Surgical Instruments & ForcepsMedical Stainless (316L, 17-4PH, 420, 440C)
High edge retention, high hardness, and corrosion resistance through repeated autoclaving
03Fluidic Valves & Manifold BlocksPEEK (Polyetheretherketone), Ultem (PEI)
Outstanding chemical inertness, high temperature resistance, and dimensional stability
04Optically Clear Fluid ManifoldsCast Optical Acrylic (PMMA), Polycarbonate
Optical clarity for automated visual fluid inspection and reagent flow monitoring
05Diagnostic Enclosures & HousingsMedical ABS, Aluminium 6061-T6 (Passivated)
Chemical resistance against hospital disinfectants and aesthetic visual appeal
Systematic 6-Step Engineering & Production Workflow
- 1
CAD upload & review
Upload 3D CAD models and technical specifications for rapid medical feasibility review and quoting.
- 2
DFM & engineering review
Dedicated engineering DFM review to optimize toolpaths, radii, and sterilization cleanability.
- 3
Controlled manufacturing
Precision CNC machining, Swiss turning, or micro-milling in a controlled, clean manufacturing shop.
- 4
Post-processing
Post-processing: ultrasonic cleaning, electropolishing, ASTM passivation, and laser marking.
- 5
Quality inspection
100% dimensional and microscopic burr inspection under cleanroom-compatible conditions.
- 6
Packaging & logistics
Cleanroom packaging in protective sealed pouches and global logistics support with full documentation.
Technical questions: Medical & Life Sciences
Can Graphler machine medical-grade PEEK and Titanium Ti-6Al-4V ELI?
Yes. We routinely machine biocompatible Titanium Grade 23 (ELI) and virgin medical-grade PEEK with complete raw material lot certifications and lot traceability.
What cleaning and passivation standards does Graphler follow for medical components?
We perform multi-stage ultrasonic cleaning and chemical passivation compliant with ASTM A967 (citric or nitric acid formulations) to ensure components are free from free iron and surface contaminants.
What file formats are accepted for a medical device manufacturing quote?
We accept 3D CAD models in STEP (.stp), IGES (.igs), STL (.stl), and compressed (.ZIP) archives.
Other industries we serve
All industriesStart a Medical & Life Sciences project
Upload your 3D CAD model and drawing. An engineer reviews feasibility, tolerances and material certification before we quote.